Safety Precautions
Always read the manual carefully before use. Wear protective gear like gloves and eyewear. Keep children and pets away while operating. Avoid trimming near open flames or sparks. Ensure the area is clear of debris to prevent accidents. Never touch the cutting line with bare hands. Store the device in a dry, secure location when not in use.
1.1 Handling the Trimmer/Edger Safely
Always hold the trimmer/edger with a firm grip, using both hands as instructed. Avoid using the device in wet conditions or near water sources. Keep the cutting line away from your body and avoid touching it while the motor is running. Ensure the device is turned off and cooled down before handling the spool or line. Never modify the trimmer/edger or use it for purposes other than intended. Regularly inspect the device for damage or wear and tear to ensure safe operation. Follow all guidelines provided in the Black & Decker manual.
1.2 Protective Gear and Clothing
Wear safety goggles or protective eyewear to shield eyes from debris. Use gloves to maintain a secure grip and protect hands. Ensure long pants and closed-toe shoes are worn to prevent injury. Avoid loose clothing that could get caught in moving parts. A dust mask is recommended to avoid inhaling grass clippings or dust. Keep long hair tied back and avoid jewelry that may pose a hazard. Always follow the safety guidelines outlined in the Black & Decker manual for optimal protection.
1.3 Precautions to Avoid Accidents
Always maintain a firm grip on the handle to control the trimmer/edger. Avoid overreaching, as this can cause loss of balance. Keep the cutting line away from trees, shrubs, and other plants to prevent damage. Never operate the device near water or in wet conditions to avoid electrical hazards. Ensure the area is clear of obstacles and bystanders. Follow the manufacturer’s guidelines for proper usage and maintenance to minimize risks. Regularly inspect the device for wear and tear, addressing any issues promptly.
Assembly and Initial Setup
Begin by carefully unpacking and inventorying all components. Attach the handle according to the manual’s instructions and adjust for comfortable use. Install the trimming line properly.
2.1 Unpacking and Inventory
Carefully unpack the Black & Decker trimmer/edger and ensure all components are included. Check for the trimmer unit, handle, spool, line, and any additional accessories. Verify that no parts are damaged. Refer to the manual for a detailed inventory list to confirm everything is present before proceeding with assembly. This step ensures smooth setup and operation. If any items are missing or damaged, contact customer support immediately. Proper inventory helps prevent delays.
2.2 Attaching the Handle and Adjusting
Attach the handle to the trimmer/edger unit by aligning the screws or clips as indicated in the manual. Tighten securely to ensure stability. For models with adjustable handles, adjust the length and angle to suit your height and comfort. Some models, like the GH3000, may require additional tools for handle assembly. Ensure the handle is locked firmly in place before use. Proper adjustment ensures better control and balance while trimming or edging. Refer to the specific instructions for your model, such as the LST136 or LE750, for precise guidance. This step is crucial for safe and effective operation.
2.3 Installing the Trimming Line
To install the trimming line, first, remove the spool from the trimmer/edger. Use a Black & Decker replacement spool, such as model AF-100, or rewind it with compatible bulk line. Cut the line to the recommended length specified in the manual. Thread the line through the spool’s guide holes, winding it evenly and securely. Replace the spool and ensure it clicks into place. For models like the LST136 or LE750, refer to the EasyFeed system for automatic line advancement. Always test the device at a low speed before use to ensure proper line installation.
Operating the Trimmer/Edger
Start the device by following the ignition or power-on instructions in the manual. Use the trimmer for cutting grass and the edger for clean, precise borders. For models like the LST136, utilize the EasyFeed system for automatic line feeding. Always maintain a steady grip and keep the cutting head parallel to the ground for optimal results. Regularly inspect the line and replace it when worn to ensure efficient performance.
3.1 Starting the Device
To start the trimmer/edger, ensure all safety precautions are followed. For gas-powered models, mix fuel according to the manual and prime the engine. Pull the starter cord firmly until the engine engages. For electric models, plug in the device and press the power button. Some models, like the LST136, feature a simple trigger start. Always check that the safety guard is in place and the cutting line is at the recommended length before operation. This ensures safe and efficient use.
3.2 Using the Trimmer/Edger as an Edger
To use the trimmer/edger as an edger, convert it by rotating the head or flipping a lever, depending on the model. For models like the LST136, this feature allows precise edge cutting. Position the device vertically along the edge of the lawn or pavement. Guide it slowly, maintaining control for clean, straight lines. Ensure the cutting line aligns with the edge for optimal results. Some models, like the LE750, offer adjustable handles for better comfort during edging. Always wear safety gear and keep bystanders at a safe distance.
3.3 Tips for Effective Trimming
For effective trimming, adjust the handle to a comfortable height to maintain control. Keep the trimmer head parallel to the ground to ensure even cutting. Use the correct line thickness for your trimmer, as specified in the manual. Avoid stretching the line too thin, as it may break easily. Trim in small, steady passes, especially around delicate plants. Regularly inspect and replace worn or damaged lines for optimal performance. Always follow the manufacturer’s guidelines for line replacement and maintenance.
Maintenance and Care
Regularly clean the trimmer/edger to remove debris. Store it in a dry place to prevent rust. Check and replace the trimming line as needed.
4.1 Cleaning the Trimmer/Edger
Regular cleaning ensures optimal performance and longevity of your Black & Decker trimmer/edger. Turn off and unplug the device before cleaning. Remove any debris, grass clippings, or dirt from the exterior using a soft brush or cloth. Check the spool and line for tangles or damage. Clean the cutting line and spool with a damp cloth, then dry thoroughly. For tougher buildup, mix mild soap with warm water and gently scrub. Avoid submerging electrical parts in water. Regular maintenance prevents rust and ensures smooth operation.
4.2 Storing the Device Properly
Store your Black & Decker trimmer/edger in a dry, secure location to prevent damage and rust. Avoid exposure to extreme temperatures or moisture. Before storage, ensure the device is clean and free of debris. If using a battery, remove it and store it separately in a cool, dry place. Check for any damage or wear and tear before storing. Keep the trimmer/edger out of reach of children. Proper storage ensures the device remains in good condition and ready for future use.
4.3 Replacing the Spool and Line
To replace the spool and line, turn off and unplug the device. Remove the spool by pushing the release tabs. Install a new spool or rewind the line according to the manual. Use Black & Decker’s AF-100 replacement spool for compatibility. Ensure the line is properly wound and not tangled. Reattach the spool securely. After replacement, test the device on a small area to ensure it’s cutting evenly. Proper replacement ensures optimal performance and longevity of your trimmer/edger. Always refer to the manual for specific instructions.
Troubleshooting Common Issues
Common issues include the trimmer not starting, uneven cutting, or line feeding problems. Refer to the manual for specific solutions and maintenance tips to resolve these issues effectively.
5.1 Trimmer Not Starting
If the trimmer fails to start, check the spark plug for damage or fouling. Ensure the fuel tank is not empty and the air filter is clean. For electric models, verify the power cord is intact and the circuit is not tripped. Consult the manual for specific troubleshooting steps or contact Black & Decker support for assistance. Regular maintenance can prevent such issues. Always follow the manufacturer’s guidelines for repairs and replacements to ensure safety and optimal performance.
5.2 Uneven Cutting or Edging
Uneven cutting or edging may occur due to a dull or uneven trimming line. Check and replace the line if necessary. Ensure the spool is properly installed and aligned. Adjust the handle to maintain a steady, level position during use. Clean the cutting area of debris to improve results. If issues persist, refer to the manual for guidance or contact Black & Decker support for further assistance. Proper maintenance and correct technique are key to achieving consistent performance.
5.3 Line Feeding Problems
Line feeding issues can occur if the spool is not properly installed or if the line is incorrectly wound. Ensure the spool is securely attached and the line is evenly distributed. Use the correct replacement line recommended by Black & Decker. If the line does not advance automatically, gently tap the spool on the ground to activate the feeding mechanism. For models with the EasyFeed system, press and hold the trigger to advance the line. If problems persist, refer to the manual or contact customer support for assistance.
Warranty and Customer Support
Register your product at www.BlackandDecker.com/newowner for warranty coverage. Visit www.blackanddecker.com/instantanswers for troubleshooting or contact support for assistance with your trimmer/edger.
6.1 Warranty Period and Coverage
Your Black & Decker trimmer/edger is backed by a limited warranty covering defects in material and workmanship. The warranty period varies by product, typically ranging from 2 to 5 years. Register your device at www.BlackandDecker.com/newowner to activate warranty benefits. Coverage includes free repairs or replacements during the warranty term. For details, refer to the warranty section in your instruction manual or visit the official Black & Decker website.
6.2 Registering Your Product
Register your Black & Decker trimmer/edger at www.BlackandDecker.com/newowner to activate warranty benefits and receive important updates. Provide your product’s model number, purchase date, and other required details. Registration ensures your device is covered under the warranty terms and allows access to exclusive customer support services. Keep your receipt handy for verification. This simple process helps maintain your product’s coverage and enhances your ownership experience.
6.3 Contacting Black & Decker Support
For assistance with your Black & Decker trimmer/edger, visit www.blackanddecker.com/instantanswers. This resource offers troubleshooting guides and FAQs to address common issues. If further help is needed, contact customer support directly through the website or by phone. Provide your product’s model number and a detailed description of the problem for efficient service. Black & Decker’s dedicated team is available to ensure your experience with their products remains satisfactory and hassle-free.